 |
 |
 |
|
This is the nitro powered, radio controlled Ready-To-Run
AquaCraft SuperVee 27 Deep Vee Boat.
FEATURES: Hull: Hand laid fiberglass
Rudder: CNC machined aluminum deep water type offer maximum strength
with minimum weight
Drive Type: Surface Drive strut assembly constructed of machined
aluminum, .150 flex drive cable and 3/16" prop shaft allows use of
wide variety of props
Trim Plates: Mirror finish stainless steel, blue anodized aluminum
adjustable turn fin
Engine: .18 cu in (3cc) w/pull start, glow plug, dual ball bearing-
supported crankshaft, two needle rotary carburetor, ABC liner
construction, water-cooled head with water pickup in rudder,
2-year limited warranty
Exhaust System: Tuned pipe and header
Radio: AquaCraft (made by Futaba) 2-channel AM pistol grip with
steering and throttle trim and reverse, dual rate knob, charge
jack, battery indicator and two SX-100 standard servos
Propeller: FRP (Fiber Reinforced Plastic)
Boat Stand: Laser cut unfinished plywood, features protective
cradle strips
Decals: Hull accents, logos and window detail, precut and ready to
apply
Warranty: Ninety day limited
INCLUDES: AquaCraft SuperVee 27 Boat with .18 cu in (3cc) engine, 2-channel
radio system, two servos, decals, illustrated instruction manual
and set-up DVD
REQUIRES: Fuel: 30-65% nitro content and at least 16% lubricant content
Glow Starter and Fuel Bottle
Batteries: 12 AA for radio system
Building and shore equipment
SPECS: Hull Length: 27" (686mm)
Beam (Width): 8.13" (205mm)
Height: 5.5" (140mm)
RTR Weight: 3.4lb (1545g) without batteries |
|
|
|
|
|
 |
|
 |
|
Features
- This is the nitro powered, radio controlled Ready-To-Run
- AquaCraft SuperVee 27 Deep Vee Boat.
- FEATURES: Hull: Hand laid fiberglass
- Rudder: CNC machined aluminum deep water type offer maximum strength
- with minimum weight
- Drive Type: Surface Drive strut assembly constructed of machined
- aluminum, .150 flex drive cable and 3/16" prop shaft allows use of
- wide variety of props
- Trim Plates: Mirror finish stainless steel, blue anodized aluminum
- adjustable turn fin
- Engine: .18 cu in (3cc) w/pull start, glow plug, dual ball bearing-
- supported crankshaft, two needle rotary carburetor, ABC liner
- construction, water-cooled head with water pickup in rudder,
- 2-year limited warranty
- Exhaust System: Tuned pipe and header
- Radio: AquaCraft (made by Futaba) 2-channel AM pistol grip with
- steering and throttle trim and reverse, dual rate knob, charge
- jack, battery indicator and two SX-100 standard servos
- Propeller: FRP (Fiber Reinforced Plastic)
- Boat Stand: Laser cut unfinished plywood, features protective
- cradle strips
- Decals: Hull accents, logos and window detail, precut and ready to
- apply
- Warranty: Ninety day limited
|
|
|
 |
|
 |
|
|
|
