 |
 |
 |
|
This is the 1/10 scale electric powered, radio controlled,
Associated RC10 TC4 on-road ready-to-run Touring Car.
This kit is designed for the advanced touring car racer.
FEATURES: Chassis:0.098" (2.5mm) thick, redesigned with the batteries moved
closer to the center line of the car than the TC3 for quicker
directional transitions
Drive: Four wheel shaft drive, blue anodized aluminum driveshaft
Motor: Team Associated Reedy Radon 17 turn
Radio: 2 channel AM 27MHz pistol grip Team Associated XP2 made by
Airtronics with steering and throttle trim and reverse, steering
dual rate, ATV, charge jack and standard size steering servo
Ball Bearings: Rubber sealed full bearing set
Shocks: Factory oil-filled, VCS (Volume Compensating System) Macro
composite bodied with preload spacers to adjust ride height
Gearbox: Closed front & rear
Differentials: Ball type
Transmission: Single-speed-speed
Body: Pre-painted and trimmed with simulated carbon rear wing and
hood
Tires: Rubber treaded with inserts, 2.5" (64mm) outer diameter,
1" (26mm) wide
Wheels: Eight spoke chrome finish 2" (52mm) diameter, 1" (26mm)
wide
Speed Control: Electronic-LRP Ai Super Reverse Digital, ASCM8320
Bumper: Front, foam
Suspension: Adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Ackerman type that allows the inside front wheel to turn
tighter than the outside front wheel.
Servo Saver: Included, adjustable
INCLUDES: One 1/10 scale electric powered 4WD Associated TC4 ready to run
Touring Car with 17 turn motor, pre-painted and trimmed body,
tires, wheels, 23 tooth pinion gear, 72 tooth spur gear, 2 ch
radio with servo, ESC with reverse, street tuner decal sheet and
illustrated instruction manual
REQUIRES: Radio Batteries: (8) AA size
Battery: 6 cell w/standard connector (stick or side by side)
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 14.7" (373mm)
Width: 7.5" (190mm)
Height: 4.2 (107mm) at rear body mount (highest point)
Weight: 3.03lbs (1375g) with electrics, without body
Wheelbase: 10.2" (259mm)
Tread: Front and Rear- 6.5" (164mm)
Front and Rear Track: 7.5" (190mm)
Ground Clearance: 0.31" (8mm)
Gear Ratio: 2.50:1
Tires- Front and Rear: 2.5" (64mm) outer diameter, 1" (26mm) wide
BODY-
Length: 1.6" (440mm)
Width: 7.5" (190mm)
Height: 4.1" (104mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 4x8x2mm Diff 1 ASCC3916
2 3/8 x 5/8mm Outdrives 1
4 3/16 x 5/16mm Steering (optional) 2
2 3/16 x 3/8mm Fr Input Shaft 1
1 3/16 x 3/8mm Input Bearing Housing 1
1 3/16 x 3/8mm Spur Gear
4 3/16 x 3/8mm Fr Hubs
4 3/16 x 3/8mm Rear Hubs |
|
|
|
|
|
 |
|
 |
|
Features
- FEATURES: Chassis:0.098" (2.5mm) thick, redesigned with the batteries moved
- closer to the center line of the car than the TC3 for quicker
- directional transitions
- Drive: Four wheel shaft drive, blue anodized aluminum driveshaft
- Motor: Team Associated Reedy Radon 17 turn
- Radio: 2 channel AM 27MHz pistol grip Team Associated XP2 made by
- Airtronics with steering and throttle trim and reverse, steering
- dual rate, ATV, charge jack and standard size steering servo
- Ball Bearings: Rubber sealed full bearing set
- Shocks: Factory oil-filled, VCS (Volume Compensating System) Macro
- composite bodied with preload spacers to adjust ride height
- Gearbox: Closed front & rear
- Differentials: Ball type
- Transmission: Single-speed-speed
- Body: Pre-painted and trimmed with simulated carbon rear wing and
- hood
- Tires: Rubber treaded with inserts, 2.5" (64mm) outer diameter,
- 1" (26mm) wide
- Wheels: Eight spoke chrome finish 2" (52mm) diameter, 1" (26mm)
- wide
- Speed Control: Electronic-LRP Ai Super Reverse Digital, ASCM8320
- Bumper: Front, foam
- Suspension: Adjustable
- Caster: Adjustable, caster/toe-in refers to the angle of the front
- suspension when viewed from the side of the car in relation to the
- chassis
- Camber: Adjustable, camber refers to the angle of the tops of the
- tires from vertical when viewed from front or behind vehicle
- Steering: Ackerman type that allows the inside front wheel to turn
- tighter than the outside front wheel.
- Servo Saver: Included, adjustable
|
|
|
 |
|
 |
|
|
|
