 |
 |
 |
|
This is the radio controlled, glow powered, Almost Ready-to-Fly,
Hobbico NexSTAR .46 trainer airplane.
For Beginner Modeler/Fliers.
** This version does not include a radio, pilot assist link, engine, **
NexSTAR Simulation Software, and the learn-to-fly guarantee.
With such features as SpinControl
Airfoil Extensions, SpeedBrakes and Training Flaps
no other trainer offers so much help for the first-time pilot.
FEATURES: Construction: Balsa and plywood
Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
alignment and includes a built-in aileron servo mount, wing halves
are joined with a steel rod.
Flat bottom high mount configuration
One-piece, all wood precision airfoil with SpinControl Airfoil
Extensions that provide lift even in a stall to keep the
NexSTAR level and the pilot in control.
PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
bolt (GPMQ4402),a rubber retainer and pivoting channel absorb minor
jolts of normal use, more severe jolts cause the wing to separate
from the fuselage and escape the full force of impact.
Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
section of wing near fuselage and hold airspeed to a minimum to
insure smooth landings, removeable as pilot skills increase
Covering: Polyester based heat shrink, color scheme is White and Red
with Silver accents. True Red TOPQ0227
Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts,
(US Patent #6,886,780) lock in place with a snap and provide the
strongest landing gear of any trainer, also easily removeable
Aileron Control: Requires single standard size servo, wings are built
with dual aileron servo trays for future upgrades as skills
increase, can also be equipped with flaps
Tail Mounting: EasyAlign System guides parts into place automatically
in perfect alignment without tools
Building Time: Ready to fly in 3-5 hours
Warranty Period: Hobbico guarantees this kit free from defects in
both material and workmanship at purchase date. This warranty
does not cover any component part damaged by use or modification.
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies,
pre-bent main landing gear with three 2¾" (70mm) foam main
wheels, steerable nose gear, IsoSmooth aluminum and rubber engine
mount, 9.1oz (270cc) fuel tank, 2¼" (57mm) red plastic spinner
pushrods, linkages, and photo-illustrated instructions
REQUIRES: Radio: 4-channel
Servos: Four standard size (1-throttle, 1-rudder, 1-elevator,
1-elevator)
Engine: .46 cu in (7.5cc) engine (*see comments below)
Model airplane fuel
Building and field equipment
Charging Rx and Tx batteries
SPECS: Wingspan: 68.75" (1746mm)
Wing Area: 722 sq in (46sq dm)
Weight: 6.5lb-6.75lb (2835g-3060g) ready to fly
Wing Loading: 20-21 oz/sq ft (61-66g/sq dm)
Length: 56" (1420mm)
Airfoil: High-Wing
Center of Gravity: 3-3/16" (81mm) forward limit
3-9/16" (90mm) aft limit from the wing's leading
edge at the fuselage sides
Control Throws-
Elevator: Up & Down ½" (13mm)
Rudder: Right to Left ¾" (19mm)
Ailerons: Up ½" (13mm) Down 3/8" (9mm)
Right Thrust Angle-3°
Down Thrust Angle-4° wing respect to wing incidence |
|
|
|
|
|
 |
|
 |
|
Features
- This is the radio controlled, glow powered, Almost Ready-to-Fly,
- Hobbico NexSTAR .46 trainer airplane.
- For Beginner Modeler/Fliers.
- ** This version does not include a radio, pilot assist link, engine, **
- NexSTAR Simulation Software, and the learn-to-fly guarantee.
- With such features as SpinControl
- Airfoil Extensions, SpeedBrakes and Training Flaps
- no other trainer offers so much help for the first-time pilot.
- FEATURES: Construction: Balsa and plywood
- Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
- alignment and includes a built-in aileron servo mount, wing halves
- are joined with a steel rod.
- Flat bottom high mount configuration
- One-piece, all wood precision airfoil with SpinControl Airfoil
- Extensions that provide lift even in a stall to keep the
- NexSTAR level and the pilot in control.
- PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
- bolt (GPMQ4402),a rubber retainer and pivoting channel absorb minor
- jolts of normal use, more severe jolts cause the wing to separate
- from the fuselage and escape the full force of impact.
- Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
- section of wing near fuselage and hold airspeed to a minimum to
- insure smooth landings, removeable as pilot skills increase
- Covering: Polyester based heat shrink, color scheme is White and Red
- with Silver accents. True Red TOPQ0227
- Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts,
- (US Patent #6,886,780) lock in place with a snap and provide the
- strongest landing gear of any trainer, also easily removeable
- Aileron Control: Requires single standard size servo, wings are built
- with dual aileron servo trays for future upgrades as skills
- increase, can also be equipped with flaps
- Tail Mounting: EasyAlign System guides parts into place automatically
- in perfect alignment without tools
- Building Time: Ready to fly in 3-5 hours
- Warranty Period: Hobbico guarantees this kit free from defects in
- both material and workmanship at purchase date. This warranty
- does not cover any component part damaged by use or modification.
|
|
|
 |
|
 |
|
|
|
