Join our mailing list!

  Home > Engines >

  Ofna .28 Picco w/Pull Start
 

Bookmark and Share
 
Our Price: $199.99


Product Code: OFN51232

Description Technical Specs Learn More
 
This is the .28 cu in Picco Engine with Pull Start from Ofna.
            This engine is used to power 1/8 scale R/C kits.

FEATURES: Black anodized .28 cu in size crankcase fits nearly every vehicle that uses a .21 size engine ABC construction (Aluminum piston with a Chromed Brass cylinder) Round Rear exhaust Ball bearing-supported heavy duty 14mm crankshaft Slide valve two needle carburetor for greater response at the beginning and end of the power band. This works well for on-road and racing applications for fast take-offs and high speed. 8mm venturi insert included, giving a good balance between power and fuel economy SG (pilot) shaft Blue anodized aluminum head 9 port sleeve

INCLUDES: One .28 Ofna Engine w/Slide Valve Carburetor and 8mm venturi One brass collet (to hold flywheel in place) One silicone rubber insert for Force and Novarossi type manifolds One running and parts information sheets One Picco Sticker sheet

SPECS: Displacement: .28 cubic inches (4.66cc) Bore: 18.35mm Stroke: 17.60mm HP: 2.9 Weight: 11.78oz (330g) Length: 80mm (3.14") front of front bearing to back of pull start Width: 31mm (1.21") width neglecting the mounting flanges 21mm (.83") width between mounting holes same side 36.5mm (1.4") width between mounting holes opposite side 31mm (1.2") crankcase width Height: 109mm (4.3") from bottom of crankcase to top of cylinder head (contact Ofna for more technical information). Needle settings: low:10½-11½ turns out / high: 3-3½ turns out

REQUIRES: Fuel with 5%-30% Nitromethane (20% is recommended) and a lubricant content of 18% or more Muffler or tuned pipe depending on application Glow plug: OFNG5107 Air Filter: OFNG1137
 
Features
  • FEATURES: Black anodized .28 cu in size crankcase fits nearly every vehicle that uses a .21 size engine ABC construction (Aluminum piston with a Chromed Brass cylinder) Round Rear exhaust Ball bearing-supported heavy duty 14mm crankshaft Slide valve two needle carburetor for greater response at the beginning and end of the power band. This works well for on-road and racing applications for fast take-offs and high speed. 8mm venturi insert included, giving a good balance between power and fuel economy SG (pilot) shaft Blue anodized aluminum head 9 port sleeve

Related Products...
Traxxas TRX 3.3 IPS Shaft w/Recoil
Our Price: $152.99
Add
O.S. 46AX ABL w/Muffler
Our Price: $129.99
Add
O.S. 55AX ABL w/Muffler
Our Price: $159.99
Add
Dynamite Platinum .28XP with Pull/Spin-Start
Our Price: $229.99
Add
Axial .28 Spec 1S Engine Green
Our Price: $119.98
Add
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engines
Engines > Car & Truck Engines


Custom Works Enforcer Wing $29.00
O.S. 46AX ABL w/Muffler $129.99
Custom Works Caster Block 25 deg (2)E*,I* $4.50
Custom Works Dog Bone for GBX (Short) $7.50
Custom Works Caster Block, 20deg, E*,I* $4.50
Associated Factory Team TC5F Kit $364.99
Park Zone F4U Corsair RTF $259.99
Spektrum DX5e 5-Channel Full Range Transmitter Only MD2 $59.99
Traxxas Jato 3.3 Nitro 2WD Stadium Truck RTR $359.97